Help centre

Conversions

Beta

Flat patterns for sheet metal parts

Flattening and unfolding sheet metal parts: generate the flat pattern and download it as a STEP file.

Last updated 13/11/2026

Jump to: Personal setup · Company setup (company admins only)

A flat pattern is the unfolded, flat shape of a sheet metal part. For supported sheet metal parts, Voluminate creates it as a separate STEP file next to the formed model.

Personal setup

Get a flat pattern from an existing model

  1. Open All files on the part page and select an eligible model. Under Flat pattern STEP, click Generate flat pattern… or New flat pattern… if a file already exists. You can do this on your own parts, and on company parts if you are a workspace admin or member.
  2. In Flat pattern parameters, check the bend settings and adjust them for this run. Select Also save as my defaults if you want to reuse those values for future runs.
  3. Click Generate flat pattern. If a file already exists with the same settings, choose Show existing file to find it.
  4. When the file is ready, click Download next to it under Flat pattern STEP in All files. The formed model is available as a separate STEP file.

The fields start with your defaults. If the model already has a flat pattern, they start with its values instead. Click Reset to my defaults to use your current defaults.

Get a flat pattern with every conversion automatically

  1. Open 3D Modeling Instructions and go to Sheet metal.
  2. Turn on Always generate flat pattern. This is saved to your account.
  3. Start an AI CAD or Engineer Checked conversion. In Convert to 3D, Create a flat pattern automatically is already on. Turn it off to skip the flat pattern for this conversion. It is not offered for AI Preview, Engineer Built or upgrades from AI Preview.
  4. When the model is ready, a flat pattern of the main model appears in All files under Flat pattern STEP, marked Automatic. For other models, use Generate flat pattern…. If the part is not a sheet metal part, no flat pattern is created and All files shows why.

If Always generate flat pattern is on only because it follows your company, it applies only to company parts. To use it on your own parts too, turn it off and on again.

Your bend settings

  1. Open 3D Modeling Instructions, go to Sheet metal, and find Bend settings.
  2. Enter Sheet thickness (mm) and Inside bend radius (mm). Under Compensation method, choose K-factor, Bend allowance (mm), or Bend deduction (mm). Enter its value and click Save bend settings.
  • Saved values are your own. Changes to your company's values do not affect them.
  • Without your own values, you use your company's values on company parts. Everywhere else you use the Voluminate defaults: 2 mm sheet thickness, 2 mm inside bend radius and K-factor 0.45.
  • To stop using your own values, click Match my company settings, or Reset to Voluminate defaults if you are not in a company. This also resets Always generate flat pattern.

Your defaults are always one complete set of values: your own values, otherwise your company's values, otherwise the Voluminate defaults. Automatic flat patterns use them. For a flat pattern you start yourself, the values in Flat pattern parameters are used.

Company setup (company admins only)

Company owners and admins can set bend values for everyone in the company, so members do not have to enter them.

  1. Select a company workspace in the header and open Company Settings. Click 3D Modeling Instructions.
  2. Under Sheet metal, enter the company's Bend settings and click Save company bend settings. Reset to Voluminate defaults removes them.
  3. Turn on Always generate flat pattern so that Create a flat pattern automatically is already on for company parts.

How the company settings affect your members:

  • Members without their own bend values use the company's values on company parts, including after you change them.
  • Members who saved their own values keep them. Match my company settings makes them follow the company again.
  • Members who turned their own Always generate flat pattern off still see Create a flat pattern automatically on company parts, but turned off.
  • Company settings never apply to a member's personal parts.
  • Workspace admins and members can create flat patterns on company parts. Viewers can see and download them.

Example

The company saves a 1.5 mm inside bend radius and K-factor 0.40. Ben never saved any bend values, so Ben's defaults are 1.5 mm and 0.40. Anna saved 2 mm and 0.45, so Anna's defaults stay at those values. When the company changes the K-factor to 0.42, Ben's next automatic flat pattern uses 0.42 and Anna's does not.

Ready to try it on your own part?

Your first 3D model is free, no credit card required.

Start free