Help centre

Conversions

3D Modeling Instructions

Save your modelling preferences and sheet metal settings once, and see how company instructions work with them.

Last updated 13/11/2026

Jump to: Personal setup · Company setup (company admins only)

3D Modeling Instructions tell Voluminate how to model your parts: written instructions, and settings for manufacturing technologies such as sheet metal.

Personal setup

Your personal instructions apply to new conversions you start, in your personal workspace and in company workspaces.

Save your personal instructions

  1. Open 3D Modeling Instructions and find Personal modelling instructions at the top.
  2. Enter the modelling instructions you want to reuse, then click Save personal instructions.
  3. To remove your instructions for future conversions, clear the text box and save.

Your sheet metal settings are on the same page, under Sheet metal. See Flat patterns for sheet metal parts.

Instructions for one part

  1. Open the part from your Workspace and click Convert to 3D in the model area. The dialog can also open by itself once the pre-check is complete.
  2. In Convert to 3D, check the service under Service, then enter your instructions under Part details.
  3. Check Instructions for this conversion underneath and expand Combined brief to see the combined text. Click Convert at the bottom when you are ready to start; the button shows the price.

Which instructions take priority?

  1. Part brief for the part you are converting.
  2. Personal modelling instructions from the account starting the conversion.
  3. Company modelling instructions for the company workspace.

Voluminate combines the applicable instructions into a single brief. When two instructions conflict on the same modelling decision, the brief tells the model to follow the higher-priority instruction for that decision only. All other compatible instructions still apply.

The combined brief has a 2,000-character limit, including headings.

Personal instructions override one company instruction

The company asks for 5 mm corner radii and chamfered hole entrances. Your personal instructions ask for 3 mm corner radii on CNC parts. On a CNC part, the 3 mm instruction takes priority for the corners. The company's chamfer instruction still applies.

The part brief overrides one personal instruction

Your personal instructions say to use the midpoint of the specified tolerance range for CNC dimensions. The part brief says to use the nominal diameter for the main bore. The part brief takes priority for that bore. The tolerance midpoint instruction still applies to other CNC dimensions with specified tolerances.

See the instructions used for a model

On the part page, open Modelling instructions. For the next conversion previews the current instructions. Used for this model shows the saved instructions for the selected model. Expand View exact brief to see or copy the full text. People with access to a shared part can see the saved instructions for its models.

New instructions apply to new conversions. To change an existing result, use the feedback loop.

Company setup (company admins only)

Company owners and admins can save defaults for everyone in the company. They apply to new conversions in the company's workspaces.

  1. Select a company workspace in the header. Open Company Settings from the top navigation. On smaller screens, open the menu at the top left first. You must be a company owner or admin.
  2. Click 3D Modeling Instructions near the top, beside Workspaces & people.
  3. Enter your instructions under Company modelling instructions, then click Save company instructions.

How the company instructions affect your members:

  • Every member's new conversions in a company workspace include the company instructions.
  • A member's personal instructions and the part brief take priority where they conflict on the same modelling decision. All other company instructions still apply.
  • Company instructions never apply to a member's personal workspace.

The company's sheet metal settings are on the same tab, under Sheet metal. See company setup for flat patterns.

Ready to try it on your own part?

Your first 3D model is free, no credit card required.

Start free